语言选择：
| 相似牌号 | |||||||||||
| CDA | ASTM | ASARCON | SAE | AMS | Federal | Ingot# | Military | Other Desc | |||
| C86500 | ASTM B505 | SAE 430 C | AMS 4860 | QQ-C-390B TYPE III | 421 | MIL-C-22229 COMP 7 | HIGH STRENGTH YELLOW BRASS | ||||
| SAE J461 | QQ-B-726 CLASS A | ||||||||||
| SAE J462 | |||||||||||
| 化学成分 (according to ASTM B505-08) | |||||||||||
| Cu% | Sn% | Pb% | Zn% | Fe% | Ni% | Sb% | P% | S% | Al% | Mn% | Si% |
| Note: Single values represent maximums.注意单一数值代表最大值 | |||||||||||
| A In determining copper minimum, copper may be calculated as copper plus nickel. | |||||||||||
| 55.00-60.00 | 1 | 0.4 | 36.00-42.00 | 0.40-2.00 | 1.0A | N/A | N/A | N/A | 0.50-1.50 | 0.10-1.50 | N/A |
| 机械性能(according to ASTM B505-08) | |||||||||||
| Tensile Strength(min) | Yield Strength(at .5% extention under load min) | Elongation(in 2in. or 50mm min, %) | Brinell Hardness(min) | Remarks | |||||||
| Ksi | MPa | Ksi | MPa | ||||||||
| 70 | 483 | 25 | 172 | 25 | N/A | ||||||
| Machinability加工性能 | |||||||||||
| 合金 | Rating | 密度 | |||||||||
| C86500 | 26 | 8.33 gm/cm3 @ 20 C | |||||||||
联系人：Betty Cao
手机：+86 138 4009 6762
电话：+86 138 4009 6762
邮箱：info@leesh.cn
地址： 辽宁省沈阳市沈北新区蒲丰路97号